What can NC-LINK do for you? -Share WiFi everywhere -Enjoy WiFi everywhere
Why Need PoE Solution In CCTV Project? Analog CCTV Digital CCTV Network CCTV P System System System as t, Pr es • Hardware • Hardware and Software en • Hardware t & • Analog recording • Use Existing TCP/IP • Digital recording Network Futur • Close Circuit • Coaxial • Local Control & Remote • Coaxial Management • Local Control e • Local Control • Multi-User CC • Single User TV • Single User • Low Installation & • Low Installation & Maintenance Cost Ma • High Installation Maintenance Cost & Maintenance • Scalable and easy for rk Cost integration et
Why Need PoE Solution In CCTV Project? The main advantage of PoE for the CCTV project is the installation of remote or outside equipment without having to connect to AC power.
What are PoE Solution Contain？ PoE system contain PSE(power sourcing equipment) part and PD(powered device) part. PSE - PoE Switch, PoE Injector PD - PoE Splitter
What is the primary problems we are meeting now? Protocol 802.3af（PoE） 802.3at（PoE plus） Classification 0～3 0～4 Electric current(MAX) 350mA 600mA PSE output voltage 44～57V DC 44～57V DC PSE output power <=15.4W <=30W PD input voltage 36～57V DC 42.5～57V DC PD maximum power 12.95W 25.5W Cabling requirements CAT-5 CAT-5e or better VOIP, Wireless IP camera with PTZ, Application AP,IP camera, RFID Highpower Outdoor AP
Two kind of connection method: Midpan Connection and Endpoint Midpan mainly used for mature data communication project, for no changed original equipment and wiring material. Endpoint mainly used for CCTV project and Wireless-LAN project for Easy Installation and reduce the wiring work(especially strong electricity wire).
Designed Suit For Different Kind of NVR Point1: Unique port design for connecting NVR
Designed Suit For Different Kind of NVR 803.3af/at NC-PUS051D -5 FE Port with 4 PoE Port -Power Supply: 65W -Steel Desktop Design 803.3af/at NC-PUS091D -9 FE Port with 8 PoE Port -Power Supply: 125W -Steel Desktop Design 803.3af/at NC-PUS018D -16 FE Port+2GE CO with 16 PoE Port -Power Supply: 250W/480W -Standard 19-inch rack- mountable steel case 803.3af/at NC-PUS024D -24 FE Port+2GE CO with 24 PoE Port -Power Supply: 370W/480W -Standard 19-inch rack- mountable steel case
Designed Suit For Different Kind of PoE/non-POE IP camera Point2: Solution for non-PoE IP cameras : Installation Ease PoE splitter support non-PoE IP camera(select 5V/9V/12V powering)
Designed Suit For Different Kind of PoE/non-POE IP camera 803.3af NC-POE11 -Complies with IEEE802.3af. -Maximum power output up to 12W. -Selectable power output(12V/9V/5V) For non-PoE NC-POE13 -Support wide input voltage range 24Vdc to 36Vdc. -Power Supply: 12-24W -Output 12v 1-2A for IP camera 803.3af NC-POE14 -Complies with IEEE802.3af. -Maximum power output up to 12W. -Power output 12V 1A for IP camera 803.3af/at NC-POE15 -Complies with IEEE802.3af/at. -Maximum power output up to 24W. -Power output 5VDC/4A, or 9VDC/2.5A or 12VDC/2A.
Help you extend your PoE Rang from 100m to 400m Point3: Our PoE Extender will help you extend your PoE range from 100 meter to 400 meter, suit for your different CCTV project requirements.
VLAN Port Protect your network security Point4: Solid DIB Switch devide port VLAN easily，help restraint broadcast storm and defense DHCP spoofing, especially there exist some different networking equipment in your intranet, easy prevent broadcasting storm, internetworking of different networks and security control. Different colour circle stand for different VLANs belonged port.
NC-LINK Costdown Passive PoE Solution for CCTV Project Point5: Most IP cameras spec 802.3af – we power these with our 48v solution;But, We also have solutions for 12v-48v non-PoE cameras and W ireless Aps ,Budget 6 watts per camera, 8 watts or more if they have PTZ or IR features. This PoE Switch used to provide PoE power to: * NC-LINK, Cisco, Mikrotik and Ubiquiti Access points, cameras and Routers * 12-24v WiFi Access points * 12-24v industrial equipment
Try a Costdown Passive PoE solution 4PoE Ports, 95 NC-PUS051DN Watts -5 FE Port with 4 Passive PoE Port MAX Power Supply: 95W -PoE Pin:3/6 (+), 1/2 (-) -Power out 12-48V 7PoE Ports, 120 NC-PUS081DN Watts -8 FE Port with 7 PoE Port -MAX Power Supply: 120W -PoE Pin:3/6 (+), 1/2 (-) -Power out 12-48V 8PoE Ports, 140 NC-PUS091DN Watts -9 FE with 8 PoE Port -MAX Power Supply: 140W -PoE Pin:3/6 (+), 1/2 (-) -Power out 12-48V 14PoE Ports, 300 NC-PUS024DN Watts -16 FE with 14 PoE Port -MAX Power Supply: 300W -PoE Pin:3/6 (+), 1/2 (-) -Power out 12-48V
Ideal for NC-LINK, Cisco, Mikrotik and Ubiquiti Access points, cameras and Routers
Update our Costdown PoE Solution from your Non-PoE IP camera? No matter how many volts of PoE switch you select, NC- Point6: If your IP camera do not support PoE and it is a POE13’s stable 12V power input 12v powered unit. Please use 24V Passive PoE Switch let your IP camera work well. match our 12v PoE splitter(NC-POE13) to power your non-PoE IP camera for a cost-effective PoE solution.
自我介绍 • Founded: November, 2007 • Headquarters: Shenzhen, China • Reach: 30 countries and growing • Number of employees: 200 • Cooperation Mode: OEM/ODM • Products: – Wireless(AP, AP Router, Adapter, High Power and Outdoor) – Switch(Unmanaged, WEB-Smart and Managed 2 Layer) – DSL – Broadband – PoE, 4G, Powerline – Hotspot Products http://www.nc-link.cn