LUMINHOME OPTOELECTRONIC CO.,LTD www.luminhome.com Introduction of LED Modules What are LED modules? Unique Features LED modules typically are constructed Double-coupling IP68 protection of a series of surface-mount LEDs It adopts the screw-free structure to soldered to a copper circuit layer that is avoid the penetration of water vapor separated from a base, which is through the screw hole; its double frequently aluminum and typically rigid silicon-rubber rings insulate LEDs with although flexible base materials are now the outside environment completely, being used, by an electrically isolating, thus to eliminate any erosion to chips heat conductive dielectric material and PCB boards from outside. making for a very compact, durable IP68 based modules will be perfect for light assembly. “Ultra Robust” module technology Each LED is equipped with bypass Generally, electrical interconnection is protection, to protect single-circuit structure made via a removable wire connector of the full connection series, even open or soldered to the LED module's short circuit fault can’t affect current and conductive copper layer. High-power voltage distribution of other LED, the other LED modules which are generally Typical Advantages: LED can work under the normal operating Offer cool lighting with a very long life expectancy mode. LED modules made up of surface- Efficiency: maximum light output mount LEDs with a power consumption Easy to get different lighting applications Chips Applied of 0.5 watts or more, are the latest thing LED Modules = Design Freedom Only Qualified "LUMILEDS" in lighting today due to their high brightness and relative efficiency. LED Modules = Design Freedom As high power lighting series are based on the modern technology of LED modules; it is quite easy for our designers to get the follow outdoor lighting series.
Double IP68 Modular Tunnel lights Double IP68 Modular High Bay lights Bean Angle: 25°/40°/60° Double IP68 Modular Street Light Double IP68 Modular Spot/flood lights Bean Angle: 25°/40°/60° The Unique technical advantages of High Power lighting applications 1)Flip-chip Technology applied in Rabel / Rabel ES series,minimize the rate of breaking down of LEDs.
Light Distribution Curve-Batwing 2)Module Technical Date and Drawings LED chip:LUMILEDS Luminous efficicacy of the whole module: 80 to 120LM/ Watt Color Tempterature: 2700K to 6000K, or customized Dimention: 275*70*45mm IP rate: IP68 Drive Current:350mA to 700mA Connections of the LED unit: 18 units in series Interface: 2Screw metalic waterproof connectors Net Weight: 0.85Kg
3) Once the High Power LED lighting series are combimed with the modules, they have typically the following features Heat dissipation of the whole Honeycomb Briquette effect structure It simulates and adopts the Make clever use of module burning principle of honeycomb bracket that only play a briquette; it is easy to transform supporting role, and to the original block of radiator to transform it to a “thermal various modules, as well as to bracket” that is capable of enable air to convect and fully conducting the module’s heat to pass through the gaps between the light shell as a structural modules by utilizing the part, thus to promote the cooling honeycomb effect, thus to effect of radiator of cooling remove the heat rapidly, and module, the design aims to fully reduce temperature by around 20 utilize the surface area to ℃. Independent multi-circuit Tool-free maintenance constant-current output Use special structural design to Each circuit is independently achieve the manual disassembly controlled; any failure in single and installation of lighting circuit does not affect normal components, in consideration work of other circuits. If a single that the high-power lights are LED generally installed in higher unit is damaged, the current operating environment, the distribution is also even in the operators require as few tools as entire series and parallel possible for their convenience structure, thus protect the whole and security. system.